Overview
BSEC series DC charger is the charging equipment specially developed by Wenzhou Bluesky Energy Technology Co., Ltd. for electric vehicles. This series of products have three phase type and are equipped with floor-mounted installation modes. The product has integrated charging interface, HMI, communication, billing system together aims to achieve a higher safety, stronger adaptability and more convenient operation. With waterproof, dustproof, anti-corrosion functions. Streamline design adopted in the charger appearance makes users feel more comfortable. Bluesky DC charger could be applied in large parking lots, residential areas, shopping malls, hospitals, parks and scenic spots, etc.
Key Features
1. Strict Control Pilot
Charging pile could fit well with all European/Japanese/National standard EVs with its perfect compatibility. Precise control of power supply and cut off to avoid safety incident.
2.Robust Protection
The charging pile has been equipped with robust protection functions of overload, surge, overvoltage, undervoltage, short circuit, earthing, overheat, lightening, emergency stop, etc to avoid damages by accident caused by abnormal weather or grid.
4. Appearance with Perfect Sealing
Appearance design adopts zinc-plated board + multi-layer spraying process to achieve excellent sealing, which can resist the rainstorm effectively. The multi-layer spraying technology could prevent rust from causing damage to the product. Anti-ultraviolet treatment adopted in the coating process aims to restrain the cabinet from aging, which has ensured longer life cycle of the product.
Technical Parameters:
| 60KW+60KW+43KWDC500VAC415V Simultaneous charging Three connectors(CCS+CHAdeMO+Type 2)specifications | |||
| Outlet specifications | (option) | (option) | (option) |
| Connection standard | CCS Combo2 (IEC 61851-23) | CHAdeMO 1.0 | IEC 61851-1 |
| Connector/socket type | IEC62196-3 CCS Combo2 Mode 4 | CHAdeMO Mode 4 | IEC 62196-2 Type 2 Mode 3 |
| Vehicle Safety Communication | CCS Combo2 - IEC 61851-23 over PLC | CHAdeMO - JEVS G105 over CAN | IEC 61851-1 PWM (AC Type 2) |
| System output voltage range | 150-500VDC | 400/415VAC | |
| Number of output interface configuration modules | 21kW×3 | 21kW×3 | 43kW×1 |
| Connector maximum output current | 150A | 150A(Limited to the maximum 125A) | 63A |
| Compliance and safety | CE | CE | CE |
| Cable length | 4m | 4m | 4m |
| General specifications | |||
| Environment | Indoor / outdoor | ||
| Operating temperature | ,-20 ºC to +50 ºC(de-rating characteristic applies) Option: -35 ºC to +50 ºc | ||
| Storage temperature | ,-40 ºC to +70 ºC | ||
| RFID system | ISO/IEC14443A/B, ISO/IEC15693, FeliCa™ 1, NFC reader mode, LEGIC Prime & Advant | ||
| Payments | Smart Card, Server based Online Payments or equivalent | ||
| Network connection | GSM / CDMA / 3G modem, 10/100 Base-T Ethernet | ||
| Interaction Display | Full-color (7 in 800x480 TFT ) LCD display for driver interaction | ||
| Visual Indicators | Error indication, Presence of input supply indication, Charge process indication and other relevant information | ||
| safety protection | Over current, under voltage, over voltage, Residual current, Surge protection, Short circuit, Earth fault at input and output, Input phase reversal, Emergency shut-down with alarm, Over temperature, Protection against electric shock | ||
| Push Button | Mushroom type emergency stop switch (Red) | ||
| Supported Communication Protocols | OCPP1.6 | ||
| Protection | IP54 | ||
| Dimensions (D x W x H) | 600×690×1500 mm | ||
| Input Chracteristics | |||
| AC Supply System | Three-Phase, 5 Wire AC system (3Ph.+N+PE) | ||
| Nominal Input voltage | 3Ø, 260~530VAC | ||
| Input Frequency | 50Hz, ±10Hz | ||
| Input Supply Failure backup | Battery backup for minimum 1 hour for the control system and billing unit. Data logs should be synchronized with CMS during back up time, in case battery drains out | ||
| Power Module | |||
| Max Output Power per Module | 21kW | ||
| Max Output Current per Module | 50A | ||
| Output voltage range for each module | 150-500VDC | ||
| Converter Efficiency | Maximum efficiency >95% | ||
| Power factor | Rated output load PF ≥ 0.99 | ||
| Voltage regulation accuracy | ≤±0.5% | ||
| Current sharing accuracy | ≤±0.5% | ||
| Steady flow accuracy | ≤±1% | ||
| Connector parameters 1# | |||
| Rated voltage | DC1000V | ||
| Rated current | 150A | ||
| standard | IEC62196-3 CCS2 | ||
| Electromagnetic lock | NO | ||
| Temperature Sensor | no | ||
| communication interface | PLC | ||
| Connector parameters 2# | |||
| Rated voltage | DC500V | ||
| Rated current | 125A | ||
| standard | CHAdeMO 1.0 | ||
| Electromagnetic lock | YES | ||
| Temperature Sensor | NO | ||
| communication interface | CAN | ||
| Connector parameters 3# | |||
| Rated voltage | AC480V | ||
| Rated current | 3AC63A | ||
| standard | IEC 62196-2 Type 2 | ||
| Electromagnetic lock | NO | ||
| Temperature Sensor | NO | ||
| communication interface | PWM | ||
